Spearboard.com - The World's Largest Spearfishing Diving Boating Social Media Forum

Spearboard.com - The World's Largest Spearfishing Diving Boating Social Media Forum (http://www.spearboard.com/index.php)
-   Non-Gun DIY Projects and Customizations (http://www.spearboard.com/forumdisplay.php?f=241)
-   -   What paint for fiberglass blades (http://www.spearboard.com/showthread.php?t=180635)

newbiee1987 02-24-2015 09:09 PM

What paint for fiberglass blades
 
Have anyone tried this before. I'm gonna be out of the water for a couple of weeks, and I have ADD, hahahahah, so i'm gonna spend some time doing this. Question its, what kind of paint I should use for the blades, I'm thinking about plasti dip, but also saw ppl using acrylic paint on fiberglass.

Let me know guys :toast:

Cisco

phil herranen 02-24-2015 09:52 PM

Re: What paint for fiberglass blades
 
acrylic , heat set it when you are done with a hair dryer , or spray paint . do it as thin as possible. do not use plasti dip it will slow the flex of the blades

newbiee1987 02-24-2015 09:58 PM

Re: What paint for fiberglass blades
 
Quote:

Originally Posted by phil herranen (Post 2027666)
acrylic , heat set it when you are done with a hair dryer , or spray paint . do it as thin as possible. do not use plasti dip it will slow the flex of the blades

Thank you very much Phil, so if I use spray paint, I don't need to heat set it right? ?


All times are GMT -5. The time now is 06:51 PM.

The World's Largest Spearfishing Diving Social Media Forum Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2002 - 2014 Spearboard.com