Home | Tournaments | Calendar | Weather | Merchandise | Sponsors |
|
Non-Gun DIY Projects and Customizations This section is for your DIY spearfishing projects and customization other then spearguns. |
|
Thread Tools | Rate Thread | Display Modes |
01-15-2017, 01:15 AM | #1 |
Sponsor
Join Date: Mar 2012
Location: key west
Posts: 813
|
super cheap and very nice wishbone beads
just wanted to share this serendipity that happened a while back
I was in K mart in the bath section and came across these stainless steel beads they are shower rings - and they have perfect wishbone beads built in I paid 5$ for a set of ten and each one has 5 beads on them - so 50 beads for 5$ but you just take some of the 1.7mm - super tight and stiff dyneema - put it through the bead and tie it off - I use pliers to make it super tight - then put either super glue - (in this case I used some epoxy I had mixed ) and put it on the knot for insurance - (so it won't slip ever) then you just use them these are so perfect -they are neither too big or too small - and the hole is perfect for the dyneema enjoy
__________________
Last edited by Impaler Spearguns; 01-15-2017 at 01:25 AM. |
Bookmarks |
Thread Tools | |
Display Modes | Rate This Thread |
|
|