Home Tournaments Calendar Weather Merchandise Sponsors

Go Back   Spearboard.com - The World's Largest Spearfishing Diving Boating Social Media Forum > Spearfishing Gear > All About Guns

All About Guns What's your weapon of choice, and why? Discuss the beloved speargun here!

Reply
 
Thread Tools Rate Thread Display Modes
Old 05-27-2015, 04:25 AM   #1
bryang123
Registered User
 
bryang123's Avatar
 
Join Date: Apr 2015
Location: San Diego
Posts: 78
New Shaft for Euro 110

I have a Riffe euro 110 and am looking at buying a threaded shaft to employ a slip-tip setup (for wsb, yellowtail, etc). The euro 110 comes standard with a 17/64 shaft. Will moving up in diameter help or hurt? should I get a 17/64 threaded or a 9/32?
bryang123 is offline   Reply With Quote
Old 05-27-2015, 04:28 AM   #2
bryang123
Registered User
 
bryang123's Avatar
 
Join Date: Apr 2015
Location: San Diego
Posts: 78
Re: New Shaft for Euro 110

Also, do I get the riffe Ice Pick Tip or riffe Mini Ice Pick tip? and what's the difference?
https://www.speardeals.com/Slip_tips_s/142.htm
bryang123 is offline   Reply With Quote
Old 05-27-2015, 04:32 AM   #3
apexdiver
Tony
 
apexdiver's Avatar
 
Join Date: May 2012
Posts: 2,009
Re: New Shaft for Euro 110

I would go 9/32 and a mori tip.
apexdiver is offline   Reply With Quote
Old 05-27-2015, 04:34 AM   #4
bryang123
Registered User
 
bryang123's Avatar
 
Join Date: Apr 2015
Location: San Diego
Posts: 78
Re: New Shaft for Euro 110

Quote:
Originally Posted by apexdiver View Post
I would go 9/32 and a mori tip.
Which Mori? and why the wider shaft and why the mori? I'm just curious and want to know more about the gear since I'm new to slip tips and shaft sizes
bryang123 is offline   Reply With Quote
Old 05-27-2015, 04:41 AM   #5
apexdiver
Tony
 
apexdiver's Avatar
 
Join Date: May 2012
Posts: 2,009
Re: New Shaft for Euro 110

Quote:
Originally Posted by bryang123 View Post
Which Mori? and why the wider shaft and why the mori? I'm just curious and want to know more about the gear since I'm new to slip tips and shaft sizes
Mori spectra tip https://www.speardeals.com/Mori_Spec...p/mori-001.htm.Mori has proven to be one of the more accurate tips on the market and a lot of guys seem to swear by them(myself included).I can't speak for the ice picks but I have heard of a lot of accuracy issues with that particular tip.The thicker shaft will provide better penetration on bigger fish.
apexdiver is offline   Reply With Quote
Old 05-27-2015, 04:46 AM   #6
bryang123
Registered User
 
bryang123's Avatar
 
Join Date: Apr 2015
Location: San Diego
Posts: 78
Re: New Shaft for Euro 110

Quote:
Originally Posted by apexdiver View Post
Mori spectra tip https://www.speardeals.com/Mori_Spec...p/mori-001.htm.Mori has proven to be one of the more accurate tips on the market and a lot of guys seem to swear by them(myself included).I can't speak for the ice picks but I have heard of a lot of accuracy issues with that particular tip.The thicker shaft will provide better penetration on bigger fish.
Alright! 9/32 and mori tip it is! Thank you for all the help
bryang123 is offline   Reply With Quote
Old 05-27-2015, 05:07 AM   #7
kwtony
Snorkel Master
 
kwtony's Avatar
 
Join Date: Dec 2011
Location: Lower Keys
Posts: 5,588
Re: New Shaft for Euro 110

Rob Allen makes threaded shafts with notched and a wire fin. They are a great option too.


http://www.freediveshop.com/product_...oducts_id=1024
kwtony is offline   Reply With Quote
Old 05-27-2015, 06:00 AM   #8
bryang123
Registered User
 
bryang123's Avatar
 
Join Date: Apr 2015
Location: San Diego
Posts: 78
Re: New Shaft for Euro 110

Quote:
Originally Posted by kwtony View Post
Rob Allen makes threaded shafts with notched and a wire fin. They are a great option too.


http://www.freediveshop.com/product_...oducts_id=1024
alright. thanks man!
bryang123 is offline   Reply With Quote
Old 05-27-2015, 08:21 AM   #9
finnfanrm
Registered User
 
Join Date: May 2011
Location: Stuart Fl
Posts: 155
Re: New Shaft for Euro 110

The best place to buy any spear is Addiction spears. I had a tab break on one of his spears over a year after I bought it sent him a text and he just sent me a new one give Dean a call 949 295 3590
__________________
Remember you always miss the shot you didn't take
finnfanrm is offline   Reply With Quote
Old 05-27-2015, 08:28 AM   #10
MAKO Spearguns
Sponsor
 
MAKO Spearguns's Avatar
 
Join Date: Jan 2009
Posts: 1,168
Re: New Shaft for Euro 110

http://www.makospearguns.com/Euro-Me...abs-p/mtts.htm




Check out our shafts as well.

Made for 6mm threaded screw on tips and slip tip adapters, the MAKO Spearguns

Carbon Spring Steel shafts are arguably the strongest spears on the planet. They are by far stronger than stainless steel shafts and by making them with low profile (mini) sharkfin tabs, they are even stronger. Shafts with mini sharkfin tabs (built for open muzzle guns) are 50% stronger than notched shafts. This is particularly important for longer spears.

NOTE: Threaded spears are slightly shorter than standard spears to accommodate the added length of the screw on tip or slip tip.


Specifications:
Heat Treating: Induction hardened and Tempered (IHTW) Cr-Si spring

Material: to SAE9254, Grade SHI-200

Hardness: Tensile Strength 2030MPa (minimum) to 2060MPa.

Size Tolerance: +/-0.05mm

Rust Proof Coating: Tested to 3 months x 24 hours per day, salt spray at 32 deg. Cent.
__________________


http://www.makospearguns.com/

http://www.facebook.com/makospearguns

Proud Supporter of the Fisher House and paws4vets



Same factories -Same high quality gear -Without the dive shop mark ups!
MAKO Spearguns is offline   Reply With Quote
Old 07-01-2015, 12:34 AM   #11
bryang123
Registered User
 
bryang123's Avatar
 
Join Date: Apr 2015
Location: San Diego
Posts: 78
Re: New Shaft for Euro 110

sorry for bringing this thread back but I've heard about the Mori tips not fitting or sitting crooked on riffe threaded shafts. Has anyone encountered this problem?
bryang123 is offline   Reply With Quote
Old 07-01-2015, 11:12 AM   #12
slingshaft
Hunter, Gatherer
 
slingshaft's Avatar
 
Join Date: Feb 2007
Location: San Antonio, Texas
Posts: 1,783
Re: New Shaft for Euro 110

Hey Man, check out the ULUSUB slip tips. $105.00 shipped.
slingshaft is offline   Reply With Quote
Old 07-02-2015, 06:33 AM   #13
shmitefire
Registered User
 
shmitefire's Avatar
 
Join Date: Jul 2012
Location: Santa Cruz, CA
Age: 30
Posts: 290
Re: New Shaft for Euro 110

Quote:
Originally Posted by bryang123 View Post
sorry for bringing this thread back but I've heard about the Mori tips not fitting or sitting crooked on riffe threaded shafts. Has anyone encountered this problem?
Hey byrang I told you the mori tips don't fit right on the threaded riffe shafts..

Well I just got a new riffe threaded in the mail for my 90cm gun and my mori tip adapter does fit.. But it definitely doesn't screw on as smooth as it does on my mori shaft. It still fits flush and not crooked though.

Sorry I told you it wouldn't fit before, but I only had one shaft to fit test and I guess the threads vary from shaft to shaft because on the other shaft the mori tip wouldn't even do one full rotation.

The Wong tip adapter did screw on the new shaft smoother than the mori though fwiw. But I would go mori first, then you could always sell/return if it doesn't fit on your shaft.
__________________
.
shmitefire is offline   Reply With Quote
Old 07-02-2015, 03:24 PM   #14
Neptonic Systems
Official Sponsor
 
Neptonic Systems's Avatar
 
Join Date: Sep 2013
Posts: 637
Re: New Shaft for Euro 110

Quote:
Originally Posted by bryang123 View Post
I have a Riffe euro 110 and am looking at buying a threaded shaft to employ a slip-tip setup (for wsb, yellowtail, etc). The euro 110 comes standard with a 17/64 shaft. Will moving up in diameter help or hurt? should I get a 17/64 threaded or a 9/32?
Give Neptonics a call. We should be able to sort you out. We also recommend the Mori slip tip. In out experience it's the best slip tip in the world.
__________________
Neptonics Website
Instagram
Facebook



Quality you can trust from North America's Largest Selection of Spearfishing Equipment.
Neptonic Systems is offline   Reply With Quote
Old 07-02-2015, 04:17 PM   #15
killer chef
Registered User
 
killer chef's Avatar
 
Join Date: Feb 2011
Location: Santa Barbara
Posts: 314
Re: New Shaft for Euro 110

I have Mako shaft for a 110 gun is 7.5 mm treaded 6 mm new newer in the water 40$
In Santa Barbar
http://www.makospearguns.com/Euro-7-...-p/m3hptts.htm
killer chef is offline   Reply With Quote
Reply

Bookmarks

Tags
diameter, euro, riffe, shaft, slip tip

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:21 PM.


The World's Largest Spearfishing Diving Social Media Forum Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright ©2002 - 2014 Spearboard.com