Home Tournaments Calendar Weather Merchandise Sponsors

Go Back   Spearboard.com - The World's Largest Spearfishing Diving Boating Social Media Forum > Spearfishing Gear > All About Guns

All About Guns What's your weapon of choice, and why? Discuss the beloved speargun here!

Reply
 
Thread Tools Rate Thread Display Modes
Old 07-01-2018, 10:03 PM   #16
Paumalu Mark
Registered User
 
Join Date: Jun 2018
Posts: 15
Re: Loading pin/rest tab installation?

Awesome. Good to know. I致e been thinking about doing the same with a 14mm roller band. Glad it worked out for you.




Sent from my iPhone using Tapatalk
Paumalu Mark is offline   Reply With Quote
Old 07-01-2018, 10:11 PM   #17
Diver278
Registered User
 
Diver278's Avatar
 
Join Date: Sep 2011
Location: San Diego,Ca / Dapitan, PI
Posts: 464
Re: Loading pin/rest tab installation?

I think that is the best setup and I think that’s what spearq8 advised in one of his post. We’re you located?
Diver278 is offline   Reply With Quote
Old 07-01-2018, 10:12 PM   #18
Paumalu Mark
Registered User
 
Join Date: Jun 2018
Posts: 15
Re: Loading pin/rest tab installation?

I知 in Panama City Beach, FL. Moving back to Oahu, HI in October. And you?


Sent from my iPhone using Tapatalk
Paumalu Mark is offline   Reply With Quote
Old 07-01-2018, 10:15 PM   #19
Diver278
Registered User
 
Diver278's Avatar
 
Join Date: Sep 2011
Location: San Diego,Ca / Dapitan, PI
Posts: 464
Re: Loading pin/rest tab installation?

I’m from San Diego, Ca but in the Philippines right now going back tomorrow after three months here diving.
Diver278 is offline   Reply With Quote
Old 07-02-2018, 04:03 AM   #20
Mikel_24
Registered User
 
Join Date: Nov 2016
Location: Bilbao (Spain)
Posts: 445
Re: Loading pin/rest tab installation?

Quote:
Originally Posted by Marco View Post
..Btw, my 16 years old son is the one shooting the roller. I'm the one with the pneumatic.
Amazing video!
Mikel_24 is offline   Reply With Quote
Old 08-07-2020, 08:33 PM   #21
Paumalu Mark
Registered User
 
Join Date: Jun 2018
Posts: 15
Re: Loading pin/rest tab installation?

Quote:
Originally Posted by Paumalu Mark View Post
Hi, I知 Mark. 1st post here. I知 looking for some technical guidance on the best way to go about installing a loading pin 3/4 the way up a Rob Allen shaft. This mod would be for using a RA shaft with my Pathos Sniper Roller 105. I have a drill press and flopper pin-hole drill-jig already.

What type/size of pin material would be best and how best to affix the pin to shaft? Press it in? Would going in easy 90 degrees to shaft axis be adequate, or better to figure out how to drill at an angle?

Lots of questions here; Any suggestions from those of you with experience in this department would be greatly appreciated. Thanks in advance!

Mahalo,

Mark


Sent from my iPhone using Tapatalk

I知 over the Pathos roller. I changer the muzzle out to the standard Sniper one. In the process, I ruined the roller muzzle as it requires a massive amount of force to get out of the gun barrel.

Even with the traditional muzzle back on, I知 not a fan of the gun right now. Maybe the 390% band stretch (14mm small ID) is slowing the 6.75mm shaft as it may bow in the enclosed track upon firing??? Seems slow out of the gate...

Waiting for the Carbon MVD inverted roller to be released this fall before revisiting rollers.

Looking at an Ulusub 145 for an all around gun for here on Oahu.


Sent from my iPhone using Tapatalk
Paumalu Mark is offline   Reply With Quote
Old 08-08-2020, 12:02 AM   #22
Diver278
Registered User
 
Diver278's Avatar
 
Join Date: Sep 2011
Location: San Diego,Ca / Dapitan, PI
Posts: 464
Re: Loading pin/rest tab installation?

I have a question is your 105 enclosed track and if it is is it a 7mm shaft?
Diver278 is offline   Reply With Quote
Old 08-09-2020, 02:55 AM   #23
Paumalu Mark
Registered User
 
Join Date: Jun 2018
Posts: 15
Re: Loading pin/rest tab installation?

Quote:
Originally Posted by Diver278 View Post
I have a question is your 105 enclosed track and if it is is it a 7mm shaft?

Yes, 105cm Sniper-R gun (converted time regular muzzle). All of the Pathos sniper series are enclosed track. 6.75mm shaft right now.

I believe it came with a 7mm shaft (which I lost in deep water when the shooting line tangled and separated at the sharp edged line-hole on the loading tab).

The 7mm shafts seem to fit a little too tightly. I was concerned about friction slowing shaft speed.


Sent from my iPhone using Tapatalk
Paumalu Mark is offline   Reply With Quote
Old 08-09-2020, 09:59 AM   #24
Diver278
Registered User
 
Diver278's Avatar
 
Join Date: Sep 2011
Location: San Diego,Ca / Dapitan, PI
Posts: 464
Re: Loading pin/rest tab installation?

Quote:
Originally Posted by Paumalu Mark View Post
Yes, 105cm Sniper-R gun (converted time regular muzzle). All of the Pathos sniper series are enclosed track. 6.75mm shaft right now.

I believe it came with a 7mm shaft (which I lost in deep water when the shooting line tangled and separated at the sharp edged line-hole on the loading tab).

The 7mm shafts seem to fit a little too tightly. I was concerned about friction slowing shaft speed.


Sent from my iPhone using Tapatalk
Ok that’s what I was wondering I know they have enclosed track I tried a Riffe 7mm shaft in my 115 Sniper roller and it was to tight. Also I didn’t have any problem taking my muzzle and handle off of my 115 and my 85. For the muzzle I just put a bar in the kicker band hole and tapped the bar back and forth on each side while applying pressure and it came right out. The handle was a little harder lot of twisting and pulling with my friend holding the barrel but it came out.

Last edited by Diver278; 08-09-2020 at 10:07 AM.
Diver278 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:20 AM.


The World's Largest Spearfishing Diving Social Media Forum Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2002 - 2014 Spearboard.com