Home Tournaments Calendar Weather Merchandise Sponsors

Go Back   Spearboard.com - The World's Largest Spearfishing Diving Boating Social Media Forum > Spearfishing Gear > All About Guns

All About Guns What's your weapon of choice, and why? Discuss the beloved speargun here!

Reply
 
Thread Tools Rate Thread Display Modes
Old 02-02-2018, 02:49 AM   #1
Joeychan
Registered User
 
Join Date: Sep 2007
Posts: 2
Need help: How to remove trigger mechanism for Sporasub One 105

Hi all, cannot find a clue on internet. Would need to remove the whole trigger mechanism as I would need to ship it to a place with stirct speargun control rules. Anyone have an idea? Pictures or instruction manual would be most welcomed.
Joeychan is offline   Reply With Quote
Old 02-03-2018, 02:27 AM   #2
e.m.p!
Registered User
 
e.m.p!'s Avatar
 
Join Date: Jan 2014
Location: NZ
Posts: 89
Re: Need help: How to remove trigger mechanism for Sporasub One 105

Just had a look at mine and unfortunately it seems you can pull it only from top with a major operation. However, the pin in the back and the one in the handle lets you remove handle and butt, making it less obvious gun looking. I send one via post around half the globe without issues while taking all spare parts in my luggage.
Great gun, wish mine was a 105 (have the 95).
e.m.p! is offline   Reply With Quote
Old 02-03-2018, 11:14 PM   #3
spearq8
Registered User
 
spearq8's Avatar
 
Join Date: May 2009
Posts: 2,899
Re: Need help: How to remove trigger mechanism for Sporasub One 105

You can take the mech out but it certainly is not obvious. You have to actually bend the aluminium frame a little to get the mech out. I did do some pix of how to do it some time back but can't seem to find them. The secret is that it is ok to use a flat head screw driver to slightly widen the frame to allow the mech to come out. I know several people that have ruined their guns trying to remove the mech out incorrectly by using force. In my case I removed the trigger because the sears were galling and they needed to be polished. I could get about 20 amazingly accurate shots after removing the galling with ceramic stones ... but unfortunately after that the galling would happen again. If the trigger problem would be fixed this would be easily one of the best guns in that format.

You can see the test I did a few years back here and can see how I honed down the sears.

spearq8 is offline   Reply With Quote
Old 02-05-2018, 03:07 AM   #4
Joeychan
Registered User
 
Join Date: Sep 2007
Posts: 2
Re: Need help: How to remove trigger mechanism for Sporasub One 105

Quote:
Originally Posted by spearq8 View Post
You can see the test I did a few years back here and can see how I honed down the sears.

http://youtu.be/Vz2rYsZ6Y_0
THanks and is trying to search through your post. Means there's no direct way to take the mech out? As the gun is actually at my friend's hand who is a total stranger to speargun, might be a challenge to him.
Joeychan is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:23 PM.


The World's Largest Spearfishing Diving Social Media Forum Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright ©2002 - 2014 Spearboard.com