Home Tournaments Calendar Weather Merchandise Sponsors

Go Back   Spearboard.com - The World's Largest Spearfishing Diving Boating Social Media Forum > Members List

spearq8 spearq8 is online now

Registered User

Visitor Messages

Showing Visitor Messages 1 to 10 of 24
  1. Sanny
    05-30-2021 02:36 PM
    Hi Majd. My name is Aaron. You have helped me in the past with great advice (along with your posts) and I'm hoping to glean a little more wisdom from you. I am getting ready to cut some bands for a custom gun project. I'm going to use dyneema loops and bridles for a quick release wishbone setup. I read once of you referencing that varying the length of the back band wishbone will help it sit flat/level with the front band. Do you have a rule of thumb for this? I'm using 13mm small hole primeline bands with around 42.5 inches/ 44 inches band stretch. Thank you for your time. I'm going to ask this on the gun build forum; I'm sure a bunch of people would find it interesting and helpful.
  2. JJohansen
    08-25-2020 12:28 PM
    Hi Majd, my email is jjohansenwoodworking@gmail.com Thanks for your help, I hope I can get as good of results as you!
  3. kavachi
    09-14-2019 02:58 AM
    gday Majd! what's the foam you use for penetration test? got a rare delivery opp for bulky stuff, buying in Aust.....thanks!
  4. kavachi
    08-17-2019 07:27 PM
    Re tail lift leaving the mech with lighter shafts - I shape my muzzle slots to keep the bands as high as possible and in line with the shaft, working with dense wood helps as can slim things right down up for’d. Just shaping vitex muzzle for the carbon pipe now
  5. Willy_spearo
    11-09-2017 12:39 AM
    Would you concider selling you raptor ?
  6. Silvertriton
    09-26-2017 10:14 PM
    Hi Majid, I hear your concerns to avoid politics, and many thanks for the offer to access the video link, which i promise not to share. PS my Albacore in teak is gorgeous, not sure when i will have next good visibility in Panama to try it out... ciao Stefano
  7. Silvertriton
    09-01-2017 11:54 AM
    Hi Majd
    I am sure thousands of your fans are waiting eagerly for the videos of the tests you did with the italian guy from Deep Blue...please do not keep the suspense for much longer. :-) by the way I am waiting for the arrival of one of the first Albacore 130 in teak.... Ciao, Stefano
  8. doggiestyle
    08-26-2017 09:56 PM
    Hi spearQ8
    Can you tell me if the new ermessub roller trigger mech would fit into my Bleutec oceanborn which is about 4 years old.
    Also I'm sorry to see all the crap you've had to put up with due to comments on the seal gun....a gun which I have in 1.1 mt and it is also a huge disappointment in regards to a shocking trigger,the cost and no where near the claimed power in fact my 105 raptor would piss all over it...anyway I've put it down to a learning experience to not believe all the hype a gun designer may tell you!!
    Anyway if you could let me know if the trigger would fit and where to source them from it would be most appreciated.
    Thank you
    New Zealand
  9. maka
    08-13-2016 12:08 AM
    Aloha spearq8! Ive read a lot of the posts recently about 14mm small id bands and want to know if its the same as rob allens 14mm bands? Seems that you are the most experienced and love these posts and vids. Mahalo! Really appreciate all you do! Aloha Maka
  10. Andrew Makely
    02-26-2016 08:50 PM
    Andrew Makely
    I just want to say thanks as well. Your testing and insight help the rest of us out so much. If you told me a few years ago the first thing I would do to a brand new speargun is change out the trigger and take a grinder to the handle I would say your crazy. Now I tell my friends they are crazy for not doing these things. Thanks!


Total Posts
Visitor Messages
General Information
  • Last Activity: Today 01:28 AM
  • Join Date: 05-21-2009


Showing Friends 1 to 4 of 4

All times are GMT -5. The time now is 01:32 AM.

The World's Largest Spearfishing Diving Social Media Forum Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright ©2002 - 2014 Spearboard.com