Home | Tournaments | Calendar | Weather | Merchandise | Sponsors |
|
Non-Gun DIY Projects and Customizations This section is for your DIY spearfishing projects and customization other then spearguns. |
|
Thread Tools | Rating: | Display Modes |
01-21-2014, 01:33 PM | #16 |
Inflatable Floats
Join Date: Jul 2006
Location: fort collins, CO
Posts: 1,222
|
Re: DIY Float Line Help
Kwtony has a point. Some of us have to build them without a partner (insert forever alone meme here) I just duct tape one end to the fence, and pull the tube straight from the other end and shop vac it myself. I have found that spiderwire or similar fishing line works great for getting the string through to pull your spectra core. Keep the tube straight, and make sure the resistance on the line you are sucking through is minimal.
__________________
If God didn't want us to eat animals, He wouldn't have made them out of meat! Questions about the Fox Float? Send them to Foxfloats@gmail.com www.foxfloats.com |
01-21-2014, 03:37 PM | #17 |
Snorkel Master
Join Date: Dec 2011
Location: Lower Keys
Posts: 5,588
|
Re: DIY Float Line Help
If you only have spiderwire on your fishing rod, open the bail and vac it out one end, and tie the line to the end you just vac'd out and just reel it through, so you dont have to cut or waste your line. Thread works nice because it only costs a buck or so, and you can just toss it out when you are done. Ive made a few with thread and am still on the one roll i bought from the fabric store. A rod and reel will make it less messy and contain it all.
__________________
IG @kw.tony |
12-22-2016, 12:09 AM | #18 |
Shooter & Shooter
Join Date: Nov 2014
Posts: 955
|
Re: DIY Float Line Help
Old thread, but when I made my tubed floatlines I used PU tubing. It is way more abrasion resistant than the softer PVC. But not all PU tubing is created equal. Some of it is too stiff, while the softest is just about soft enough for floatline use.
To get the dyneema through, I went to a friend's highrise building, dropped the tubing over the balcony and inserted the dyneema into the tube with some small fishing lead balls clamped to it. I was alone, too so no one to pull on my tubing... |
06-05-2017, 01:44 PM | #19 |
Registered User
Join Date: Jan 2015
Location: g
Posts: 43
|
Re: DIY Float Line Help
This is how i made my Float line, you can decide by your own on the materials but the PU Tube works very well!
https://www.youtube.com/watch?v=5RFAMAWmNGQ&t=206s |
06-07-2017, 12:31 PM | #20 |
Sponsor
Join Date: Mar 2012
Location: key west
Posts: 813
|
Re: DIY Float Line Help
i have a few sets of the fancy plugs but i will tell you this- the cheap pvc tubing isnt nearly as nice as the relaxed rubber used on riffe float lines.
craigs float lines has the relaxed rubber and all the accessories i think. do what gr said - you are wasting your time. one fish spine into that rubber and it fills with water and sinks you can make your own plugs out of starboard or ipe hardwood- start with a 3/8"diameter dowel of whatever material you want to use- plastic is nice - but ipe is harder and more durable- just hand carve and sand and drill etc.- make a groove to wrap the whipping twine around etc.- that is the only way to do it without getting the expensive metal plugs from neptonics (they are so nice though) i just waited for someone to get their riffe float line bitten by sharks and i took them and took out the plugs- that happened 2 times - plus i bought 1 set from neptonics - so i have 3 sets sitting around in a tackle box i have a white pvc/ combo bungee float line from neptonics that is so nice - but it aint cheap or durable - but it is definitely the smoothest thing in the water - with no drag at all to swim with but i use for wahoo only and i am anal about protecting it if you insist on pursuing this pm me and i will send you the plugs i have for a discount- but rest assured - you will be far happier with a store bought one from riffe or one you make with craigsfloatlines.com - with similar quality. the ones made with the clear pvc from home depot are too stiff but they are a bit more durable than the more rubbery variety sold by riffe or craigs the clear stuff is more plasticy and the riffe ones are more rubbery- the rubbery ones are super smooth and high performance the clear stuff is stiffer but a bit tougher but not as smooth or easy to swim with and it has a "memory"- so if you store it and it kinks or it is in loops - when you play it out - it is coily in the water- where as the riffe ones etc. have no memory i made some cool float lines from bungee material from ebay - just straight bungee - 1/2"diameter- they have all colors available it floats - stretches - and costs like 60$ for 250' a trick i use for the shop vac method (tony was at my house and and we were doing one ) was to tie the thread to a q tip- and suck that through
__________________
Last edited by Impaler Spearguns; 06-07-2017 at 03:10 PM. |
06-07-2017, 07:27 PM | #21 | |
the deeper the blue.....
Join Date: Oct 2016
Posts: 498
|
Re: DIY Float Line Help
Quote:
PVC floatline connected to 3 metre 3X stretch bungee at gun end, with heatshrink over the floatline-bungee connection, super low drag and nothing to get hung up on when fish takes off Last edited by kavachi; 06-07-2017 at 07:31 PM. Reason: typo |
|
08-01-2017, 07:32 PM | #22 |
the deeper the blue.....
Join Date: Oct 2016
Posts: 498
|
Re: DIY Float Line Help
Looking for replacement floatline for tuna board.
Needs to be approx 6mm to fit camcleat, and i’ve found that diam good balance between low drag in current but thick enough to hand haul, tough enough for the camcleat and hold up when a doggie wraps it up deep. Also needs to be hi-vis color on surface, bright yellow or orange. hopefully reasonably UV-resistant dye, as got years out of last rig. Obviously needs to float, but not super floaty like the traplines. Low stretch as it needs to stop the fish dead once the shaft end bungee is maxed out [retrieving gear off the reef 30m+ in raging current with scuba gets boring very quickly] The orange yellow fleck MFP braid I had on the board was great - nice hard stiff carrier and tight laid so doesnt bunch along core when cleating hard like some of the cheap dinghy sheetlines, but no idea what brand it was, and some prick knocked it off so cant ID. the Samson MFP floatline’s closest looking stuff Thing thats hardest to gauge online is each line's stiffness and memory in water, propensity to tangle. most of the yacht braids are designed to be softer to grip winch drum and to tail nicely - looking for the opposite for use on tuna board, hence looking at hard MFP braid floatlines like Samson’s 6mm MFP, which also has good colour http://www.samsonrope.com/Pages/Prod...?ProductID=461 Greatly appreciate any reccos, pointers |
08-02-2017, 02:15 PM | #23 | |
Official Sponsor
Join Date: Sep 2013
Posts: 637
|
Re: DIY Float Line Help
Quote:
We'd love to hear more about your experience especially your feeling the need to protect it.
__________________
Neptonics Website Quality you can trust from North America's Largest Selection of Spearfishing Equipment. |
|
08-02-2017, 04:32 PM | #24 |
the deeper the blue.....
Join Date: Oct 2016
Posts: 498
|
Re: DIY Float Line Help
as mentioned in earlier post - PVC floatlines are fantastic, esp in honking current, but unfortunately not for going thru camcleats, or getting ripped thru the coral by doggies
|
10-28-2017, 02:21 AM | #25 | |
the deeper the blue.....
Join Date: Oct 2016
Posts: 498
|
Re: DIY Float Line Help
Quote:
I could go up to 3/8" MFP which will have the stiffness, but a lot more drag, more freight $$, and will have to buy a bigger cam cleat. Anyone out there found some nice stiff MFP or similar hard small-diameter floating line? |
|
04-30-2018, 04:12 PM | #26 | |
Registered User
Join Date: Nov 2017
Posts: 129
|
Re: DIY Float Line Help
Please post link when you found it. Thanks.
Quote:
|
|
04-30-2018, 09:31 PM | #27 |
the deeper the blue.....
Join Date: Oct 2016
Posts: 498
|
Re: DIY Float Line Help
|
Bookmarks |
Thread Tools | |
Display Modes | Rate This Thread |
|
|