Home | Tournaments | Calendar | Weather | Merchandise | Sponsors |
|
All About Kayak Diving Here is a place to discuss the growing travel mode of kayak diving. |
|
Thread Tools | Rate Thread | Display Modes |
07-27-2016, 09:09 PM | #1 |
Registered User
Join Date: Nov 2011
Location: Roi Namur, Marshall Islands
Age: 68
Posts: 401
|
Why did they quit making the Scupper Pro?
I just started kayaking and pretty new at it. I had a guy give me an older Scupper Pro. It's a little faded and I had to patch the drain holes and do some fixing up but I love this boat. Just wonder why they dropped it from their line?
|
08-01-2016, 05:41 PM | #2 | |
Registered User
Join Date: Nov 2005
Location: Truckee, CA
Posts: 4,924
|
Re: Why did they quit making the Scupper Pro?
Quote:
Those same traits however, are negatives to many other divers I've paddled with. For folks who are larger/heavier, the boat lacks floatation and the seat is too narrow. I've known a number of folks who started with Scuppers and then moved on to larger yaks with more primary stability, especially for diving and fishing. I bought mine new from Monterey Bay Kayaks. They only had two left and were not getting more. They said people were passing up the scuppers for more modern and more stable models. This might have a lot to do with it's demise. Ron. |
|
08-02-2016, 08:30 AM | #3 |
Mike Wilborn
Join Date: Apr 2012
Location: Southeast, MI
Posts: 466
|
Re: Why did they quit making the Scupper Pro?
about a year ago, "kayak angler" ran an article suggesting the same thing, (bring back the supper pro). So you guys aren't alone.
I myself have a trident. I have not paddled a scupper pro, but from what I have read, the seat is lower in the water than in a prowler, (which is very similar to the trident). I already have my butt in the water if I'm not using plugs in the trident, so a scupper sounds like an uncomfortable ride to me. I would give it a test paddle though... |
08-02-2016, 11:10 AM | #4 | |
Registered User
Join Date: Nov 2005
Location: Truckee, CA
Posts: 4,924
|
Re: Why did they quit making the Scupper Pro?
Quote:
Anyway, I find the prowler to be wider, with more initial stability than the scupper, but with less secondary stability. To me if feels like you sit more on the prowler where you sit more in the scupper. As a practical example, when coming in to the beach, if I get broached by a wave in the prowler, I'm at the mercy of the wave until I get flipped over. With the scupper, I can side surf it all the way to the beach, even without thigh straps. The seat well in the scupper is so deep, it actually provides some support for my old lower back. An added seat makes it almost comfy. As to speed, one day I had a batch of folks, and therefore a batch of boats, out at the lake. I had my GPS in a dry bag and did a lot of paddling. Putting out a given amount of effort with the same paddle, the 13' prowler ran about 1-1.5mph slower than the scupper, and surprisingly the scupper ran at the same speed as the 17' sea lion. Of course with it's upswept bow and stern, the sea lion only has about 13' of wetted profile in calm water. The two big advantages the prowler has over the scupper are that the prowler has a higher volume and therefore a higher carrying capacity, and it's a more stable fishing and diving platform. As to a wet ride, yep, it gives it to you. However, I plug the seat and foot holes when I troll for kokanee in our local lakes and unless it's really choppy, the only water I take in is in the tank well area, (which keeps the fish fresh), and in the foot area from getting in and out a lot. Well, too much coffee this morning so I'm rambling... Ron. |
|
08-02-2016, 11:50 AM | #5 |
Registered User
Join Date: Apr 2007
Location: santa cruz
Age: 49
Posts: 5,473
|
Re: Why did they quit making the Scupper Pro?
The story I heard was that the mould hit the end of its lifespan and they had new models they wanted to do and didn't want to dump the money into making a new mold for a old hull
|
08-02-2016, 12:52 PM | #6 |
Registered User
Join Date: Mar 2013
Posts: 550
|
Why did they quit making the Scupper Pro?
I have a "prowler clone" which is the future beach / Equinox angler kayak that's 13'4" (160") and it's the same top layout as the Prowler... But has their "double hull" design which is slow in the water... But STABLE!
It can hold up to 500 lbs and I often have a dive buddy sit on the back while I paddle out to some depth for training. Anything more than a mile is a real bear like this though. Great stable boat with TONS of internal storage. If you want a Prowler that's even more stable / buoyant / robust and has tons of storage... This is the key. I paid $400 Canadian at Costco but I think Dick's has them in the States. I'd like to try a scupper pro, but not a lot of them here in Ontario. If have better luck out in Vancouver. Sent from my iPhone using Tapatalk
__________________
Home of the Lunocet Pro Monofin: http://www.ultimateswimfin.com/ A unique take on Freediving and Apnea: http://apneaddict.blogspot.com/ |
08-02-2016, 09:42 PM | #7 |
Registered User
Join Date: Nov 2005
Location: Truckee, CA
Posts: 4,924
|
Re: Why did they quit making the Scupper Pro?
|
08-02-2016, 09:51 PM | #8 |
Registered User
Join Date: Mar 2013
Posts: 550
|
Re: Why did they quit making the Scupper Pro?
I also want to try out the new Santa Cruz Raptor G2. It can be paddled or fitted with the hobie pedal system.
Looks like a great Spearo yak! Sent from my iPhone using Tapatalk
__________________
Home of the Lunocet Pro Monofin: http://www.ultimateswimfin.com/ A unique take on Freediving and Apnea: http://apneaddict.blogspot.com/ |
12-22-2020, 08:05 AM | #9 |
Good gone Wong
Join Date: Oct 2006
Location: Loreto, Baja Sur
Posts: 53
|
Re: Why did they quit making the Scupper Pro?
Reviving this old thread for fans of the Scupper Pro. There is an updated version now on the market, the Scupper 14. Lot's of upgrades, a lowered CG, vastly updated drains... in my opinion, now the best kayak on the market for spearfishing. I had the old Scupper Pro in 1997, traded up to Cobra Tourer in 2000, now 20 years old and beat up but still a great kayak... but ready for an upgrade... it will be fun to compare them. Here's the link:
https://swellwatercraft.com/scupper-14/
__________________
BD If you allow it to rule you, fear is a hard master to uncrown. Embrace the discomfort of wanting air, it is only fear and weakness leaving your body. My poem, by Me (partially stolen from SEAL Team) |
12-22-2020, 10:35 PM | #10 | |
Max
Join Date: Apr 2010
Location: Oregon
Age: 69
Posts: 6,297
|
Re: Why did they quit making the Scupper Pro?
Quote:
__________________
nec timor nec temeritas (neither fear nor foolhardiness.) |
|
12-25-2020, 04:59 AM | #11 |
Registered User
Join Date: Nov 2011
Location: Roi Namur, Marshall Islands
Age: 68
Posts: 401
|
Re: Why did they quit making the Scupper Pro?
I ended up getting an Ocean Kayak Prowler. It seems to do the job.
|
01-15-2021, 06:06 PM | #12 |
Registered User
Join Date: Jan 2017
Location: Big Island
Posts: 220
|
Re: Why did they quit making the Scupper Pro?
I run a couple Scupper Pro's for spearfishing and like using them. They're relatively light, tracks well without a rudder, and lots of storage for me. I notice larger individuals tend to have a harder time staying upright, so not for everyone.
You can still find tons of them around Hawaii. |
01-16-2021, 04:15 AM | #13 |
Registered User
Join Date: Aug 2016
Posts: 460
|
Why did they quit making the Scupper Pro?
I am looking to get the new swell version as a second kayak but I wonder how easily you can store spearguns inside and access them form the seat. Is that round hatch in the front large enough for fins or spearguns?
I am referring to the either/or 4” front hatch and oval center hatch. For spearfishing it seems crucial to have acces to the large bow compartment without having to undo and open up those buckles which would be a pita on the water. Last edited by kodama; 01-16-2021 at 06:28 AM. |
01-21-2021, 08:29 PM | #14 | |
Registered User
Join Date: Jan 2017
Location: Big Island
Posts: 220
|
Re: Why did they quit making the Scupper Pro?
Quote:
The first picture notes the circle hatch as 4" while the second picture on the New scupper shows the hatch at 6". I'd lean towards them actually being 6" since 4" seems kind of tiny. I think too that undoing those buckles would be a pain out in the water. My Scupper Pro has only two and the further one is kind of a reach. I would just leave the third (furthest buckle) undone as you probably don't need it all buckled up. Regardless, I think it's still workable to fit pretty much everything in that front hatch. Or bag some of the items and secure in the back well. |
|
01-22-2021, 05:15 AM | #15 |
Registered User
Join Date: Nov 2011
Location: Roi Namur, Marshall Islands
Age: 68
Posts: 401
|
Re: Why did they quit making the Scupper Pro?
I think too that undoing those buckles would be a pain out in the water. My Scupper Pro has only two and the further one is kind of a reach. I would just leave the third (furthest buckle) undone as you probably don't need it all buckled up.
Yeah, I don't think I would like trying to open that forward hatch anchored in seas. I can open the front hatch on my prowler with one hand very easily. |
Bookmarks |
Thread Tools | |
Display Modes | Rate This Thread |
|
|